Looking northeast at the President's Residence; winter scene.

Bio/Historical Note: The President’s Residence is among the original buildings constructed on campus. The residence was designed by Brown and Vallance, and was built under the direction of A.R. Greig, Superintendent of Buildings and Grounds. The building was originally planned as a wooden structure. However, a proposal to construct the building out of a local river rock, later known as greystone, was raised prior to the commencement of construction - if the government would foot the bill. Eventually the latter material was chosen, though the government perhaps came to regret its decision. Construction on the President's Residence began in 1910 and finished in early 1913. By the time it was completed the original cost for the building had ballooned from $32,000 to $44,615. Walter Murray, the first president of the University, was deeply embarrassed by the cost of what was to be his personal residence, even though it was also a public building. However, the people of Saskatoon were proud of the building and the status it gave their University, and no public outcry over the cost ever materialized. Renovations to the President's Residence were completed in 1989 by PCL-Maxam at a cost of $96,752. The renovations were designed by architects Malkin/Edwards.

Interior view of the [dining room] at the President's Residence.

Bio/Historical Note: The President’s Residence is among the original buildings constructed on campus. The residence was designed by Brown and Vallance, and was built under the direction of A.R. Greig, Superintendent of Buildings and Grounds. The building was originally planned as a wooden structure. However, a proposal to construct the building out of a local river rock, later known as greystone, was raised prior to the commencement of construction - if the government would foot the bill. Eventually the latter material was chosen, though the government perhaps came to regret its decision. Construction on the President's Residence began in 1910 and finished in early 1913. By the time it was completed the original cost for the building had ballooned from $32,000 to $44,615. Walter Murray, the first president of the University, was deeply embarrassed by the cost of what was to be his personal residence, even though it was also a public building. However, the people of Saskatoon were proud of the building and the status it gave their University, and no public outcry over the cost ever materialized. Renovations to the President's Residence were completed in 1989 by PCL-Maxam at a cost of $96,752. The renovations were designed by architects Malkin/Edwards.

Formal/Studio portrait of R.J. St. Arnaud, Professor, Saskatchewan Institute of Pedology (Soil Science).

Head and shoulders image of Lucy Murray.

Bio/Historical Note: Born in 1902 in Nova Scotia, Lucy Hunter Murray was the second daughter of Walter C. Murray, the University of Saskatchewan's first president, and Christina Cameron Murray. Lucy Murray received her BA at the University of Saskatchewan in 1923 and her MA from the University of Toronto in 1925. Then followed a B.Ed. degree in 1933 at the University of Saskatchewan where she received the McColl scholarship in 1933. Murray earned a Ph.D. at the University of Chicago in 1935. She joined the Regina College's department of English in 1936 and was an Associate Professor there at the time of her death in 1967. Murray was given the Cliff Shaw Memorial Award for her contributions to the Blue Jay, the journal of the Saskatchewan Natural History Society.

A flock of turkeys around a stack of straw in a field on the campus grounds of the University of Saskatchewan.

An enormous root system of a 3 year old Mr. Fairway variety crested wheat, which resists drought, controls weeds and discounts soil drifting; plant was excavated by T.K Pavlychenko.

Geology Building under construction; winter scene.

Bio/Historical Note: The construction of the Geology Building marked a return to the early style of campus architecture. The Department of Geology had been formed in 1927 and for the next six decades was based in the east wing of the Engineering Building. A growing faculty and student population had forced the department to cobble together makeshift accommodation in trailers and remote campus buildings. Designed by the architectural firm Black, McMillan and Larson of Regina, the building was given a neo-Collegiate Gothic exterior to blend harmoniously with the other buildings in the central campus. The two-and-a-half-storey building was erected just south or the Bowl side of the W.P. Thompson Biology Building, providing 8,543 square metres for office, laboratory, library, classroom, and storage space for rock and fossil samples. The exterior was clad with greystone and dressed with tyndal limestone. The dominant feature of the interior was a two-story atrium that featured the mosaics for the former exterior walls of the Thompson Building, a life-size skeleton of a Tyrannosaurus rex and geological and biological displays. The $18.5 million Geology Building was completed in 1988 and fused the space between Physics and Biology and linked, through a walkway, with Chemistry, creating an integrated science complex on campus.

Interior view of St. Thomas More College Chapel. View from back of chapel looking toward front.

Bio/Historical Note: Saint Thomas More College (STM) has the distinction of being the first and only federated college at the University of Saskatchewan. It was established as a Catholic college in 1936 following negotiations between Fr. Henry Carr of the Basilian Fathers of Toronto and President Walter Murray of the University of Saskatchewan, and was named for Thomas More, who had been canonized in 1935. Yet the pre-history of the college and its buildings goes back more than a decade earlier. For several years, Saskatoon Catholics had been asking for a Catholic college at the newly established University of Saskatchewan. The first step was taken in 1926, when a group of Catholic laymen established the Newman Society, with the long term goal of establishing a Catholic college at the university. By September of that year, "arrangements were in place for Fr. Dr. Basil Markle from the Archdiocese of Toronto to teach Scholastic Philosophy at the University of Saskatchewan and to serve as chaplain for the Catholic students." The first facility for the Catholic chaplain, with chapel and clubrooms for the use of the Catholic students, was Newman Hall (usually called "the white house"), built in 1927 on land on the south side of the campus at the corner of College Drive and Bottomley Avenue. This building later became St. Thomas More College in 1936 and in 1943 it was enlarged in anticipation of an expected large influx of students when the war would end. The first section of the present greystone building was constructed in 1954-1956 at a cost of $600,000; it was designed by architects Webster and Gilbert and built by Shannon Brothers of Saskatoon, for whom the college's Shannon Library is named. The new building was officially opened on 7 February 1957. Subsequent additions to the college building were completed in two phases, one in 1963 and another in 1969. This three-stage period of construction on the building translated into well over a decade of constant construction between 1954 and 1969, and included a chapel, library, cafeteria, auditorium, faculty offices, classrooms, and an art gallery. Living quarters on the third and fourth floors, used by the Basilian Fathers for many years, have been converted to offices and classroom space in recent years. Renovations since 2000 have involved changes to the auditorium, cafeteria, student and faculty lounges, library, art gallery and the rededication of some areas to use as classrooms.

Dr. E. Bruce Waygood (seated) and Dr. Louis Delbaere check a computer printout data from which protein structure is interpreted.

Unidentified speaker at the opening of the Saskatchewan Cancer and Medical Research Institute. Crowd in foreground and platform of dignitaries in background. View from behind the crowd looking towards the platform.

Bio/Historical Note: The Saskatchewan Cancer and Medical Research Institute was officially opened on 10 May 1958 by Premier T.C. Douglas. Clad in locally quarried greystone with limestone panels, it was the.last of the buildings that constituted the University’s Medical Complex’s initial phase. Designed by Izumi, Arnott and Sugiyama and completed at a cost of $783,000, the building’s purpose was to provide shared accommodation for both general medical research and cancer specific investigations. Funding came from the federal and provincial governments and the provincial and national branches of the Canadian Cancer Society. A planned third floor was added in 1966. The building was "deconstructed" in 2009, with much of the building's material recycled including the greystone cladding for use with the E Wing that opened in 2013.

View of exterior of the POS Pilot Plant.

Bio/Historical Note: The POS (Protein, Oil and Starch) Pilot Plant is a research organization that specializes in extraction, fractionation, purification, and modification of biologically derived materials. The company, which was founded in July 1977, is located in the Innovation Place Research Park on the University of Saskatchewan campus. POS Pilot Plant, the largest pilot plant operation of its kind in North America, has grown from eighteen employees in 1977 to over ninety employees in 2003. The company employs people from a wide range of disciplines: scientists, engineers, technicians, operators, tradespeople, logistics and information researchers, and administrative personnel. POS Pilot Plant is dedicated to finding personalized solutions for clients' bioprocessing needs. Services provided include: process and product development, optimization and scale-up; hazard analysis and critical control points; protocols and good manufacturing practice plans; and ingredient sourcing, shelf-life testing and analytical development. There are also consulting services, and support services concerning materials management, maintenance, and information. The Plant serves bioprocessing industries including nutraceuticals and functional foods; cosmetics and fragrances; fats, oils and lipids; food and ingredients; animal feeds; and Biotechnology and agricultural biotechnology. In 2019 the plant was rebranded KeyLeaf Life Sciences.